Canon Toner Status Software Download Lbp612cdw Updated FREE

Canon Toner Status Software Download Lbp612cdw

<Adjust Epitome Quality>

All the settings related to image quality adjustment are listed with descriptions. Default settings are marked with a dagger ().

Asterisks (*) Settings marked with an asterisk (*) may not be displayed depending on the model you are using, options, or other setting items.

<Automobile Suit Gradation>

<Auto Correction Settings>

Select whether to automatically perform a quick gradation adjustment or color shift correction after the machine is turned ON.

<Auto Adjust Image Regularly>

Select when to make an automated quick gradation aligning. If <When Turning Main Power ON> is selected, quick adjustment is automatically made after the auto is turned ON. Y'all can also perform this adjustment manually (Quick Adjust).

<Off>

<When Turning Main Ability ON>

<Right Print Color Mismatch>/<Timing for Correct Print Colour Mismatch>

Select the timing at which the Correct Print Color Mismatch role is to be performed automatically later on the car is turned ON. You lot can also perform this adjustment manually (Correcting "Impress Colour Mismatch").

<After Press Offset Job>

<When Turning Main Power ON>

<Correct Print Color Mismatch>

<Arrange Print Position>

Adjust the impress position for each paper source. The print position can be adjusted in the range from -0.twenty" to +0.twenty" (-5.0 to +v.0 mm) in increments of 0.01" (0.i mm). Adjusting Print Position

<Multi-Purpose Tray>

<Adjust Vertically (Front Side)>

-0.20" to 0.00" to + 0.xx" (-5.0 to 0.0 to + 5.0 (mm))

<Adjust Horizontally (Front Side)>

-0.xx" to 0.00" to + 0.twenty" (-five.0 to 0.0 to + v.0 (mm))

<Adjust Vertically (Back Side)>

-0.20" to 0.00" to + 0.20" (-v.0 to 0.0 to + 5.0 (mm))

<Adjust Horizontally (Back Side)>

-0.twenty" to 0.00" to + 0.xx" (-five.0 to 0.0 to + v.0 (mm))

<Drawer 1>

<Adjust Vertically (Front end Side)>

-0.xx" to 0.00" to + 0.twenty" (-v.0 to 0.0 to + 5.0 (mm))

<Adjust Horizontally (Forepart Side)>

-0.xx" to 0.00" to + 0.twenty" (-v.0 to 0.0 to + 5.0 (mm))

<Adjust Vertically (Back Side)>

-0.twenty" to 0.00" to + 0.xx" (-5.0 to 0.0 to + 5.0 (mm))

<Arrange Horizontally (Dorsum Side)>

-0.20" to 0.00" to + 0.20" (-5.0 to 0.0 to + v.0 (mm))

<Drawer two> *

<Adjust Vertically (Front Side)>

-0.20" to 0.00" to + 0.20" (-5.0 to 0.0 to + 5.0 (mm))

<Adapt Horizontally (Front Side)>

-0.20" to 0.00" to + 0.20" (-5.0 to 0.0 to + 5.0 (mm))

<Conform Vertically (Back Side)>

-0.twenty" to 0.00" to + 0.20" (-v.0 to 0.0 to + five.0 (mm))

<Adjust Horizontally (Back Side)>

-0.twenty" to 0.00" to + 0.20" (-5.0 to 0.0 to + 5.0 (mm))

<Special Processing>

If the impress results on special types of paper are non satisfactory, the following settings may better the quality of the printouts.

<Special Paper Processing>

When printing on the back side of printed paper, crude paper, or envelopes, the impress results may be improved by adjusting the following settings.

<Transmission Dorsum Side Print (ii-Sided Only)>

If printouts on the dorsum side of printed paper are too light, select <On>. You tin specify this setting separately for each newspaper source.

<Multi-Purpose Tray>

<Off>

<On>

<Drawer i>

<Off>

<On>

<Drawer two> *

<Off>

<On>

If you fix to <On>, image quality may exist affected or a paper jam may occur when a certain length of fourth dimension elapses later on printing on the front side or depending on the ambient humidity.

<Crude Surface Paper Mode>

When printing on rough newspaper, particularly when color images are printed besides light, select <On>. You lot can specify the settings separately for each paper source.

<Multi-Purpose Tray>

<Off>

<On>

<Drawer ane>

<Off>

<On>

<Drawer 2> *

<Off>

<On>

If you ready to <On>, the printing speed may be slower or image quality may be affected.

<Env. Flap Closing Prevention>/<Envelope Flap Closing Prevention>

If envelope flaps cling to the envelope bodies when press, select <On>.

<Off>

<On>

If you set to <On>, toner may not be fixed sufficiently, resulting in faded printouts.

<Paper Wrinkle Correction>

Printouts may wrinkle depending on the paper to use. In this case, setting this particular may solve the trouble. The improvement effect is stronger with <Way ii> than with <Mode one>.

<Off>

<Mode 1>

<Manner 2>

LBP654Cdw

This setting is effective for plain paper and thin paper.

Setting a greater comeback effect may result in faded printouts or slower printing speed.

LBP612Cdw

<Manner ane> is effective for envelopes, and <Mode ii>, for envelopes and thin newspaper.

When <Way ane> or <Mode 2> is specified, printed images may be blurry.

<Paper Curl Correction>

If the printed paper curls, ready this item. The improvement effect is stronger with <Mode 2> than with <Mode i>. Get-go try with <Mode 1>.

<Off>

<Fashion 1>

<Mode ii>

Setting a greater improvement effect may result in faded printouts or slower printing speed.

<Reduce Ppr. Sticking at Output>/<Reduce Paper Sticking at Output>

When performing 2-sided printing in color, newspaper may stick together at the output. Setting to <On> will tiresome down the printing speed of prints that may easily stick together, to reduce sticking.

LBP654Cdw

<Off>

<On>

LBP612Cdw

<Off>

<On>

<High Humidity Manner>

Print density may be uneven when the machine is used in an environs with high humidity. In this case, setting this particular to <On> may solve the problem.

<Off>

<On>

If you set to <On> and utilize the machine in an environment with low humidity, printed images and text may be blurry.

<Low Humidity Mode>

When using the auto in an environment with low humidity, printed images and text may exist blurry. In this example, setting this item to <On> may solve the problem.

<Off>

<On>

If you fix to <On>, impress density may be lower or uneven when the machine is used in an surroundings with high humidity.

<Reduce Ghosting 1> *

If the printout reveals a ghost of an image in the same folio, setting this detail to <On> may solve the problem.

<Off>

<On>

If you set to <On>, toner may not be stock-still sufficiently, resulting in faded printouts.

<Reduce Ghosting 2>

If continuous printing involves generation of ghost images, setting this particular to <On> may solve the problem.

<Off>

<On>

If you set up to <On>, print density may be uneven.

<Regularly Clean Fix. Associates>/<Regularly Clean Fixing Assembly> *

If the fixing assembly is dirty, edges of the newspaper may get smudged. In this case, changing the setting of this item may solve the problem. The higher level you specify, the higher frequency of regular cleaning is performed.

<Auto>

<Level 1>

<Level ii>

<Level 3>

If a higher level is specified, the press speed will be slower.

<Rdc. Condens. (one-Sd->2-Sd Prt)>/<Reduce Condensation (1-Sd->2-Sd Print)> *

When performing two-sided printing later on 1-sided printing, the printed images may be faint due to moisture condensation. In this example, setting to <On> may solve the problem.

<Off>

<On>

If you set to <On>, the printing speed may be slower.

<Rdc Condens. (Consec two-Sd Prt)>/<Reduce Condensation (Consec. 2-Sd Print)>

If the printed images are faint due to moisture condensation when performing two-sided printing, setting to other than <Off> may solve the problem.

LBP654Cdw

<Off>

<Mode 1>

<Mode 2>

LBP612Cdw

<Off>

<On>

For LBP654Cdw, the comeback effect is stronger with <Way 2> than <Mode 1>. If y'all set to other than <Off>, the print may be faded or the printing speed may be slower.

<Right Uneven Gloss> *

When gloss unevenness occurs in the leading edge of paper, setting to <On> may solve the trouble.

<Off>

<On>

If you set to <On>, toner may non be fixed sufficiently, resulting in faded printouts.

<Corr. Void on Paper Back Side>/<Correct Void on Paper Back Side> *

When performing 2-sided printing on sparse paper, void may occur on the back side of newspaper in the leading edge. In this example, setting this item to <On> may solve the problem.

<Off>

<On>

If you gear up to <On>, impress quality may exist afflicted.

<Correct Void> *

If printing on thin paper produces void in the leading edge of the paper, setting this item to <On> may solve the problem.

<Off>

<On>

If you lot set to <On>, printouts may be faded.

<Drop Pattern Reduction Manner>/<Reduce Formation of Waterdrop Design>

If print density is uneven in a way that the impress looks like a water drops pattern, setting this item to <On> may solve the problem.

<Off>

<On>

If you lot set to <On>, impress quality may exist affected.

<Corr. Img. Corrup. past Ppr Dust>/<Correct Image Corrupted by Paper Dust> *

Using paper containing much paper dust may consequence in a faded or streaky printout. In this case, setting this detail to <On> may solve the problem.

<Off>

<On>

If you set to <On>, the printing speed may be slower.

<Correct Blurry Image>/<Correct Blurred Image on 2nd Side> *

When performing 2-sided printing, the image may be blurry on the back side of newspaper in the trailing edge. In this case, setting this item to <On> may solve the problem.

<Off>

<On>

If you fix to <On>, the press speed may be slower.

<Prevent Fogging>

If white areas are lightly colored, setting this item to <On> may solve the problem.

<Off>

<On>

If yous gear up to <On>, print density may be lighter.

<Correct Color Mismatch>/<Correct Impress Color Mismatch> *

If color mismatch occurs, setting to <On> may solve the problem.

<Off>

<On>

If you set to <On>, the printing speed may exist slower.

<Reduce Pulsate Streak>

If streaks announced on printouts, setting to <On> may solve the trouble.

<Off>

<On>

<Reduce Toner Flaking> *

Toner may skin off the printed page depending on the paper type or the environmental conditions. In this case, setting this detail may solve the trouble. The improvement effect is stronger with <Mode ii> than <Mode one>. Kickoff attempt with <Mode 1>.

<Off>

<Mode 1>

<Style 2>

Setting a greater improvement consequence may result in curled printouts or slower printing speed.

<Reduce Toner Fixing Stain 1>/<Reduce Toner Fixing Stain ane> *

When toner stain (spotted stain) appears on the printed paper, the problem may not be solved even if you cleaning the fixing associates. In this example, setting this item to <On> may solve the problem.

<Off>

<On>

If you set to <On>, the printing speed may be slower.

<Reduce Toner Fixing Stain 2> *

When the machine is used in an surroundings with high humidity, faded or curled printouts may exist output. In this instance, changing the setting of this item may solve the trouble.

<Automobile>

<Mode 1>

<Mode 2>

<Menu> <Adjustment/Maintenance> <Arrange Image Quality>  <Special Processing> <Reduce Toner Fixing Stain 2>  Select the particular  <Yeah> ()

<Auto>
Automatically adjusts toner fixing.

<Mode 1>
If printouts are curled, set to this option.

<Mode two>
If printouts are faded, set to this option.

If yous ready to <Way 1>, printouts may be faded. If you ready to <Fashion 2>, printouts may exist curled.

<Auto Detect B&W/Color Orig.>/<Auto Detect B&W/Color Original>

When black and white impress information is mixed with color data, specify whether to prioritize the impress speed or to reduce the toner usage of the cyan, magenta, and yellow toner cartridges when press data.

<Style 1>

<Mode two>

<Rdc. Faint Print After Rplc. Cart.>/<Reduce Faint Print After Replacing Cart.>

Printouts may be faded immediately after replacement of toner cartridges with new ones. In this example, setting this particular to <On> may solve the problem.

<Off>

<On>

If you prepare to <On>, the setting will become effective with next replacement of toner cartridges. Immediately after cartridge replacement, a certain corporeality of time is required for toner to be evenly distributed inside the cartridge.

Canon Toner Status Software Download Lbp612cdw

DOWNLOAD HERE

Source: https://oip.manual.canon/USRMA-1741-zz-SS-enUS/contents/SS735_menu_0218.html

Posted by: thackerviewer91.blogspot.com

Share this post